RT-Thread_v4.1.1

components/net/lwip/lwip-2.1.2/doc/doxygen/generate.bat

@@ -0,0 +1 @@
+doxygen lwip.Doxyfile

components/net/lwip/lwip-2.1.2/doc/doxygen/generate.sh

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+doxygen lwip.Doxyfile

components/net/lwip/lwip-2.1.2/doc/doxygen/main_page.h

@@ -0,0 +1,403 @@
+/**
+ * @defgroup lwip lwIP
+ *
+ * @defgroup infrastructure Infrastructure
+ * 
+ * @defgroup api APIs
+ * lwIP provides three Application Program's Interfaces (APIs) for programs
+ * to use for communication with the TCP/IP code:
+ * - low-level "core" / "callback" or @ref callbackstyle_api.
+ * - higher-level @ref sequential_api.
+ * - BSD-style @ref socket.
+ * 
+ * The raw TCP/IP interface allows the application program to integrate
+ * better with the TCP/IP code. Program execution is event based by
+ * having callback functions being called from within the TCP/IP
+ * code. The TCP/IP code and the application program both run in the same
+ * thread. The sequential API has a much higher overhead and is not very
+ * well suited for small systems since it forces a multithreaded paradigm
+ * on the application.
+ * 
+ * The raw TCP/IP interface is not only faster in terms of code execution
+ * time but is also less memory intensive. The drawback is that program
+ * development is somewhat harder and application programs written for
+ * the raw TCP/IP interface are more difficult to understand. Still, this
+ * is the preferred way of writing applications that should be small in
+ * code size and memory usage.
+ * 
+ * All APIs can be used simultaneously by different application
+ * programs. In fact, the sequential API is implemented as an application
+ * program using the raw TCP/IP interface.
+ * 
+ * Do not confuse the lwIP raw API with raw Ethernet or IP sockets.
+ * The former is a way of interfacing the lwIP network stack (including
+ * TCP and UDP), the latter refers to processing raw Ethernet or IP data
+ * instead of TCP connections or UDP packets.
+ * 
+ * Raw API applications may never block since all packet processing
+ * (input and output) as well as timer processing (TCP mainly) is done
+ * in a single execution context.
+ *
+ * @defgroup callbackstyle_api "raw" APIs
+ * @ingroup api
+ * Non thread-safe APIs, callback style for maximum performance and minimum
+ * memory footprint.
+ * Program execution is driven by callbacks functions, which are then
+ * invoked by the lwIP core when activity related to that application
+ * occurs. A particular application may register to be notified via a
+ * callback function for events such as incoming data available, outgoing
+ * data sent, error notifications, poll timer expiration, connection
+ * closed, etc. An application can provide a callback function to perform
+ * processing for any or all of these events. Each callback is an ordinary
+ * C function that is called from within the TCP/IP code. Every callback
+ * function is passed the current TCP or UDP connection state as an
+ * argument. Also, in order to be able to keep program specific state,
+ * the callback functions are called with a program specified argument
+ * that is independent of the TCP/IP state.
+ * The raw API (sometimes called native API) is an event-driven API designed
+ * to be used without an operating system that implements zero-copy send and
+ * receive. This API is also used by the core stack for interaction between
+ * the various protocols. It is the only API available when running lwIP
+ * without an operating system.
+ * 
+ * @defgroup sequential_api Sequential-style APIs
+ * @ingroup api
+ * Sequential-style APIs, blocking functions. More overhead, but can be called
+ * from any thread except TCPIP thread.
+ * The sequential API provides a way for ordinary, sequential, programs
+ * to use the lwIP stack. It is quite similar to the BSD socket API. The
+ * model of execution is based on the blocking open-read-write-close
+ * paradigm. Since the TCP/IP stack is event based by nature, the TCP/IP
+ * code and the application program must reside in different execution
+ * contexts (threads).
+ * 
+ * @defgroup socket Socket API
+ * @ingroup api
+ * BSD-style socket API.\n
+ * Thread-safe, to be called from non-TCPIP threads only.\n
+ * Can be activated by defining @ref LWIP_SOCKET to 1.\n
+ * Header is in posix/sys/socket.h\n
+ * The socket API is a compatibility API for existing applications,
+ * currently it is built on top of the sequential API. It is meant to
+ * provide all functions needed to run socket API applications running
+ * on other platforms (e.g. unix / windows etc.). However, due to limitations
+ * in the specification of this API, there might be incompatibilities
+ * that require small modifications of existing programs.
+ * 
+ * @defgroup netifs NETIFs
+ * 
+ * @defgroup apps Applications
+ */
+
+/**
+ * @mainpage Overview
+ * @verbinclude "README"
+ */
+
+/**
+ * @page upgrading Upgrading
+ * @verbinclude "UPGRADING"
+ */
+
+/**
+ * @page changelog Changelog
+ *
+ * 2.1.0
+ * -----
+ * * Support TLS via new @ref altcp_api connection API (https, smtps, mqtt over TLS)
+ * * Switch to cmake as the main build system (Makefile file lists are still
+ *   maintained for now)
+ * * Improve IPv6 support: support address scopes, support stateless DHCPv6, bugfixes
+ * * Add debug helper asserts to ensure threading/locking requirements are met
+ * * Add sys_mbox_trypost_fromisr() and tcpip_callbackmsg_trycallback_fromisr()
+ *   (for FreeRTOS, mainly)
+ * * socket API: support poll(), sendmsg() and recvmsg(); fix problems on close
+ * 
+ * Detailed Changelog
+ * ------------------
+ * @verbinclude "CHANGELOG"
+ */
+
+/**
+ * @page contrib How to contribute to lwIP
+ * @verbinclude "contrib.txt"
+ */
+
+/**
+ * @page pitfalls Common pitfalls
+ *
+ * Multiple Execution Contexts in lwIP code
+ * ========================================
+ *
+ * The most common source of lwIP problems is to have multiple execution contexts
+ * inside the lwIP code.
+ * 
+ * lwIP can be used in two basic modes: @ref lwip_nosys (no OS/RTOS 
+ * running on target system) or @ref lwip_os (there is an OS running
+ * on the target system).
+ * 
+ * See also: @ref multithreading (especially the part about @ref LWIP_ASSERT_CORE_LOCKED()!)
+ *
+ * Mainloop Mode
+ * -------------
+ * In mainloop mode, only @ref callbackstyle_api can be used.
+ * The user has two possibilities to ensure there is only one 
+ * exection context at a time in lwIP:
+ *
+ * 1) Deliver RX ethernet packets directly in interrupt context to lwIP
+ *    by calling netif->input directly in interrupt. This implies all lwIP 
+ *    callback functions are called in IRQ context, which may cause further
+ *    problems in application code: IRQ is blocked for a long time, multiple
+ *    execution contexts in application code etc. When the application wants
+ *    to call lwIP, it only needs to disable interrupts during the call.
+ *    If timers are involved, even more locking code is needed to lock out
+ *    timer IRQ and ethernet IRQ from each other, assuming these may be nested.
+ *
+ * 2) Run lwIP in a mainloop. There is example code here: @ref lwip_nosys.
+ *    lwIP is _ONLY_ called from mainloop callstacks here. The ethernet IRQ
+ *    has to put received telegrams into a queue which is polled in the
+ *    mainloop. Ensure lwIP is _NEVER_ called from an interrupt, e.g.
+ *    some SPI IRQ wants to forward data to udp_send() or tcp_write()!
+ *
+ * OS Mode
+ * -------
+ * In OS mode, @ref callbackstyle_api AND @ref sequential_api can be used.
+ * @ref sequential_api are designed to be called from threads other than
+ * the TCPIP thread, so there is nothing to consider here.
+ * But @ref callbackstyle_api functions must _ONLY_ be called from
+ * TCPIP thread. It is a common error to call these from other threads
+ * or from IRQ contexts. ​Ethernet RX needs to deliver incoming packets
+ * in the correct way by sending a message to TCPIP thread, this is
+ * implemented in tcpip_input().​​
+ * Again, ensure lwIP is _NEVER_ called from an interrupt, e.g.
+ * some SPI IRQ wants to forward data to udp_send() or tcp_write()!
+ * 
+ * 1) tcpip_callback() can be used get called back from TCPIP thread,
+ *    it is safe to call any @ref callbackstyle_api from there.
+ *
+ * 2) Use @ref LWIP_TCPIP_CORE_LOCKING. All @ref callbackstyle_api
+ *    functions can be called when lwIP core lock is aquired, see
+ *    @ref LOCK_TCPIP_CORE() and @ref UNLOCK_TCPIP_CORE().
+ *    These macros cannot be used in an interrupt context!
+ *    Note the OS must correctly handle priority inversion for this.
+ *
+ * Cache / DMA issues
+ * ==================
+ *
+ * DMA-capable ethernet hardware and zero-copy RX
+ * ----------------------------------------------
+ * 
+ * lwIP changes the content of RECEIVED pbufs in the TCP code path.
+ * This implies one or more cacheline(s) of the RX pbuf become dirty
+ * and need to be flushed before the memory is handed over to the
+ * DMA ethernet hardware for the next telegram to be received.
+ * See http://lists.nongnu.org/archive/html/lwip-devel/2017-12/msg00070.html
+ * for a more detailed explanation.
+ * Also keep in mind the user application may also write into pbufs,
+ * so it is generally a bug not to flush the data cache before handing
+ * a buffer to DMA hardware.
+ *
+ * DMA-capable ethernet hardware and cacheline alignment
+ * -----------------------------------------------------
+ * Nice description about DMA capable hardware and buffer handling:
+ * http://www.pebblebay.com/a-guide-to-using-direct-memory-access-in-embedded-systems-part-two/
+ * Read especially sections "Cache coherency" and "Buffer alignment".
+ */
+
+/**
+ * @page bugs Reporting bugs
+ * Please report bugs in the lwIP bug tracker at savannah.\n
+ * BEFORE submitting, please check if the bug has already been reported!\n
+ * https://savannah.nongnu.org/bugs/?group=lwip
+ */
+
+/**
+ * @page zerocopyrx Zero-copy RX
+ * The following code is an example for zero-copy RX ethernet driver:
+ * @include ZeroCopyRx.c
+ */
+
+/**
+ * @defgroup lwip_nosys Mainloop mode ("NO_SYS")
+ * @ingroup lwip
+ * Use this mode if you do not run an OS on your system. \#define NO_SYS to 1.
+ * Feed incoming packets to netif->input(pbuf, netif) function from mainloop,
+ * *not* *from* *interrupt* *context*. You can allocate a @ref pbuf in interrupt
+ * context and put them into a queue which is processed from mainloop.\n
+ * Call sys_check_timeouts() periodically in the mainloop.\n
+ * Porting: implement all functions in @ref sys_time, @ref sys_prot and 
+ * @ref compiler_abstraction.\n
+ * You can only use @ref callbackstyle_api in this mode.\n
+ * Sample code:\n
+ * @include NO_SYS_SampleCode.c
+ */
+
+/**
+ * @defgroup lwip_os OS mode (TCPIP thread)
+ * @ingroup lwip
+ * Use this mode if you run an OS on your system. It is recommended to
+ * use an RTOS that correctly handles priority inversion and
+ * to use @ref LWIP_TCPIP_CORE_LOCKING.\n
+ * Porting: implement all functions in @ref sys_layer.\n
+ * You can use @ref callbackstyle_api together with @ref tcpip_callback,
+ * and all @ref sequential_api.
+ */
+
+/**
+ * @page sys_init System initalization
+A truly complete and generic sequence for initializing the lwIP stack
+cannot be given because it depends on additional initializations for
+your runtime environment (e.g. timers).
+
+We can give you some idea on how to proceed when using the raw API.
+We assume a configuration using a single Ethernet netif and the
+UDP and TCP transport layers, IPv4 and the DHCP client.
+
+Call these functions in the order of appearance:
+
+- lwip_init(): Initialize the lwIP stack and all of its subsystems.
+
+- netif_add(struct netif *netif, ...):
+  Adds your network interface to the netif_list. Allocate a struct
+  netif and pass a pointer to this structure as the first argument.
+  Give pointers to cleared ip_addr structures when using DHCP,
+  or fill them with sane numbers otherwise. The state pointer may be NULL.
+
+  The init function pointer must point to a initialization function for
+  your Ethernet netif interface. The following code illustrates its use.
+  
+@code{.c}
+  err_t netif_if_init(struct netif *netif)
+  {
+    u8_t i;
+    
+    for (i = 0; i < ETHARP_HWADDR_LEN; i++) {
+      netif->hwaddr[i] = some_eth_addr[i];
+    }
+    init_my_eth_device();
+    return ERR_OK;
+  }
+@endcode
+  
+  For Ethernet drivers, the input function pointer must point to the lwIP
+  function ethernet_input() declared in "netif/etharp.h". Other drivers
+  must use ip_input() declared in "lwip/ip.h".
+  
+- netif_set_default(struct netif *netif)
+  Registers the default network interface.
+
+- netif_set_link_up(struct netif *netif)
+  This is the hardware link state; e.g. whether cable is plugged for wired
+  Ethernet interface. This function must be called even if you don't know
+  the current state. Having link up and link down events is optional but
+  DHCP and IPv6 discover benefit well from those events.
+
+- netif_set_up(struct netif *netif)
+  This is the administrative (= software) state of the netif, when the
+  netif is fully configured this function must be called.
+
+- dhcp_start(struct netif *netif)
+  Creates a new DHCP client for this interface on the first call.
+  You can peek in the netif->dhcp struct for the actual DHCP status.
+
+- sys_check_timeouts()
+  When the system is running, you have to periodically call
+  sys_check_timeouts() which will handle all timers for all protocols in
+  the stack; add this to your main loop or equivalent.
+ */
+
+/**
+ * @page multithreading Multithreading
+ * lwIP started targeting single-threaded environments. When adding multi-
+ * threading support, instead of making the core thread-safe, another
+ * approach was chosen: there is one main thread running the lwIP core
+ * (also known as the "tcpip_thread"). When running in a multithreaded
+ * environment, raw API functions MUST only be called from the core thread
+ * since raw API functions are not protected from concurrent access (aside
+ * from pbuf- and memory management functions). Application threads using
+ * the sequential- or socket API communicate with this main thread through
+ * message passing.
+ * 
+ * As such, the list of functions that may be called from
+ * other threads or an ISR is very limited! Only functions
+ * from these API header files are thread-safe:
+ * - api.h
+ * - netbuf.h
+ * - netdb.h
+ * - netifapi.h
+ * - pppapi.h
+ * - sockets.h
+ * - sys.h
+ * 
+ * Additionaly, memory (de-)allocation functions may be
+ * called from multiple threads (not ISR!) with NO_SYS=0
+ * since they are protected by @ref SYS_LIGHTWEIGHT_PROT and/or
+ * semaphores.
+ * 
+ * Netconn or Socket API functions are thread safe against the
+ * core thread but they are not reentrant at the control block
+ * granularity level. That is, a UDP or TCP control block must
+ * not be shared among multiple threads without proper locking.
+ * 
+ * If @ref SYS_LIGHTWEIGHT_PROT is set to 1 and
+ * @ref LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT is set to 1,
+ * pbuf_free() may also be called from another thread or
+ * an ISR (since only then, mem_free - for PBUF_RAM - may
+ * be called from an ISR: otherwise, the HEAP is only
+ * protected by semaphores).
+ * 
+ * How to get threading done right
+ * -------------------------------
+ * 
+ * It is strongly recommended to implement the LWIP_ASSERT_CORE_LOCKED()
+ * macro in an application that uses multithreading. lwIP code has
+ * several places where a check for a correct thread context is
+ * implemented which greatly helps the user to get threading done right.
+ * See the example sys_arch.c files in unix and Win32 port 
+ * in the contrib repository.
+ * 
+ * In short: Copy the functions sys_mark_tcpip_thread() and 
+ * sys_check_core_locking() to your port and modify them to work with your OS.
+ * Then let @ref LWIP_ASSERT_CORE_LOCKED() and @ref LWIP_MARK_TCPIP_THREAD()
+ * point to these functions.
+ * 
+ * If you use @ref LWIP_TCPIP_CORE_LOCKING, you also need to copy and adapt
+ * the functions sys_lock_tcpip_core() and sys_unlock_tcpip_core().
+ * Let @ref LOCK_TCPIP_CORE() and @ref UNLOCK_TCPIP_CORE() point 
+ * to these functions. 
+ */
+
+/**
+ * @page optimization Optimization hints
+The first thing you want to optimize is the lwip_standard_checksum()
+routine from src/core/inet.c. You can override this standard
+function with the \#define LWIP_CHKSUM your_checksum_routine().
+
+There are C examples given in inet.c or you might want to
+craft an assembly function for this. RFC1071 is a good
+introduction to this subject.
+
+Other significant improvements can be made by supplying
+assembly or inline replacements for htons() and htonl()
+if you're using a little-endian architecture.
+\#define lwip_htons(x) your_htons()
+\#define lwip_htonl(x) your_htonl()
+If you \#define them to htons() and htonl(), you should
+\#define LWIP_DONT_PROVIDE_BYTEORDER_FUNCTIONS to prevent lwIP from
+defining htonx / ntohx compatibility macros.
+
+Check your network interface driver if it reads at
+a higher speed than the maximum wire-speed. If the
+hardware isn't serviced frequently and fast enough
+buffer overflows are likely to occur.
+
+E.g. when using the cs8900 driver, call cs8900if_service(ethif)
+as frequently as possible. When using an RTOS let the cs8900 interrupt
+wake a high priority task that services your driver using a binary
+semaphore or event flag. Some drivers might allow additional tuning
+to match your application and network.
+
+For a production release it is recommended to set LWIP_STATS to 0.
+Note that speed performance isn't influenced much by simply setting
+high values to the memory options.
+ */

components/net/lwip/lwip-2.1.2/doc/doxygen/output/index.html

@@ -0,0 +1,10 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+  <title>Redirection</title>
+  <meta http-equiv="refresh" content="0; url=html/index.html" />
+</head>
+<body>
+  <a href="html/index.html">index.html</a>
+</body>
+</html>